Puro Espresso Machine Cleaner – 20oz.

$13.50

Puro is the standard in espresso machine cleaner. It removes the residual build up of coffee solids and oils from screens, valves, and tubes of brewing groups. The first step to brewing better coffee is a clean machine because coffee residue is bitter and weird, creating dirty tasting coffee. Backflush your machine following the directions on the label and soak the portafilters (not the handles!) in a solution of very hot water and Puro.

Net Wt: 20 oz. (566 g)

Only 5 left in stock

Wishlist

Category: Tag:

Description

NOTES

Instructions for Espresso Machines

Backflush (each group head):

  1. Insert blind filter in porta-filter and add up to 1/2 teaspoon (3 g) of Puro® Powder. Insert porta-filter into group head.
  2. Activate brew cycle for 10 seconds. Stop 10 seconds. Repeat 5 times.
  3. Remove porta-filter. Activate brew cycle and rinse porta-filter in stream of water from group head. Stop cycle.
  4. Insert porta-filter into group head. Repeat step (2) without Puro® Powder 5 times.
  5. Make and discard a cup of espresso to ensure no residue remains.

Soak:

  1. Soak filters and metal of porta-filter for 30 minutes in 1 teaspoon (6 g) of Puro® Powder per 32 oz. (1 L) of hot water.
  2. Rinse with clean hot water.

Instructions for Coffee Brewers

  1. Empty coffee from equipment. Sprinkle 1/2 teaspoon (3g) of Puro® powder per 64 oz. (2L) of brewer capacity directly into brew basket.
  2. Run a full brew cycle into each vessel and hold for 30 minutes.
  3. Empty each vessel and rinse all parts with clean hot water.

TIP: Wet cloth with Puro® Powder solution and wipe down spray heads, then wipe clean. Caution: Solution may be very hot.

Download the Material Safety Data Sheet here.

You may also like…